www.hitechgroup.org

Products >>> Injection Moulding Machine 
HITECH HIPPO : FAT Series 

Description Unit 60-70 FA 80-100 FA 130-200 FA 180-400 FA 250-600 FA 400-1000 FA 450-2000 FA 500-3000 FA
Clamping
Unit 		Clamping Force Ton 60 80 130 180 250 400 450 500
Clamping Stroke mm 235 340 400 450 485 585 640 840
Plate Dimensions WxH mm 460x250 585x475 700x600 800x700 850x750 1025x950 1125x950 1400x1125
Dist. Between Tiebars WxH mm 305x195 405x295 485x385 560x460 590x490 685x610 775x675 1020x745
Mould Height (Max.-Min.) mm 305-100 350-125 405-175 460-200 495-225 600-750 650-300 850-350
 
Injection
Unit 		Screw Diameter mm 25 34 42 52 60 65 75 80
Injection Stroke mm 150 150 175 255 250 305 350 450
Theoretical Shot Volume cc 92 127 238 515 570 1250 2500 3750
Pressure On Melt Kg/cm2 1850 1850 1850 1850 1850 1850 1800 1800
Plasticizing Capacity Kg/Hr 18.5 25 40 60 70 80 90 100
Screw Speed RPM 250 181 147 127 0-127 0-127 0-107 0-107
 
Electrical Hydraulic Pump Motor HP 5 10 15 20 25 30 40 50
Screw Motor HP 2.0 3.0 5.0 7.5 Hyd. Only Hyd. Only Hyd. Only Hyd. Only
Heating Capacity KW 3.6 4.8 5.4 7.0 8.0 11.5 12.0 15
 
Hyd. Unit Working Pressure Bar 140 140 140 140 140 140 140 140
Oil Reservoir Capacity (Approx.) Ltrs 200 300 400 500 600 800 900 1000
 
General Approx. Dimensions (LxWxH) Cm 250x60x
145 		415x115x
165 		475x130x
165 		545x140x
180 		565x150x
225 		625x165x
225 		670x180x
225 		735x210x
225
Approx. Weight Ton 1.8 3.0 4.5 5.5 6.5 10.0 12.0 15.0
 
STANDARD EQUIPMENTS OPTIONALS
  • Twin Five Points Toggle Clamping System.
  • Heavy duty hard chrome plated Tie Bars.
  • Infinitely variable three stage Opening/Closing Speeds.
  • Dual Guard safety with Electric as well as Hydraulic System.
  • Nitrided Screw and Barrel.
  • Pyrometric Temperature Controls.
  • Independent Injections Speed and Pressure Controls.
  • Manual, Semi & Automatic control Mode selector.
  • Energy Saving Hydraulic Circuit.
  • Shot Counter and Hour meter.
  • Sealed Oil Reservoir with Air Filter.
  • Spru Breaking Facility.
  • Heavy duty Oil Cooler (Water Cooled).
  • Programmable Logic Controller.
  • Hydraulic Core Pulling System with Independent Pressure Controls.
  • Pyrometric Temperature Control for Nozzle.
  • Automatic Suckback System for Nozzle Drooling.
  • Single/Multi stroke Hydraulic Ejector System.
  • Electrical/Hydraulic Motorised Mould Height Setting system.
  • Screw, Cold start prevention at insufficient temperature.
  • High torque low speed Hydraulic Screw Motor.
  • Shutoff Nozzle.
  • Pneumatic blow - out device.
  • Low Pressure Clamping (Mould Safety) device to protect the Moulds.
  • Robot Interface Softwares.
  • Oil Temperature Gauge.
  • Digital Temperature Controller.
 
© All Rights Reserved with Hitech Group Of Industries
Hosted & Created By ComputeWell
Visit at : www.ComputeWell.net